Datasheet

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the
SuperWorkstation 7033A-T. Installation and maintainance should be per-
formed by experienced technicians only.
The SuperWorkstation 7033A-T is a high-end, dual processor tower server
based on the SC733T-450 workstation/server chassis and the X5DAL-TG2,
a dual processor motherboard that supports single or dual Intel Xeon
®
pro-
cessors up to 3.06 GHz at a Front Side (System) Bus speed of 533/400
MHz and up to 8 GB DDR-266/200 (PC2100/1600) SDRAM main memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the system and describes the main features of the SUPER X5DAL-TG2
mainboard and the SC733T-450 chassis, which comprise the
SuperWorkstation 7033A-T.
Chapter 2: Server Installation
This chapter describes the steps necessary to set up and check out the
configuration of the SuperWorkstation 7033A-T prior to powering up the
system. If your system was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.