Datasheet

4-2
SUPERWORKSTATION 7033A-T Manual
4-2 General Safety Precautions
Follow these rules to ensure general safety:
z Keep the area around the SuperWorkstation 7033A-T clean and free of
clutter.
z The SuperWorkstation 7033A-T weighs approximately 45 lbs. when fully
loaded. When lifting the system, two people at either end should lift
slowly with their feet spread out to distribute the weight. Always
keep your back straight and lift with your legs.
z Place the chassis top/side cover and any system components that have
been removed away from the system or on a table so that they won't
accidentally be stepped on.
z While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
!
z The power supply power cord must include a grounding plug and must
be plugged into grounded electrical outlets.
z Motherboard Battery: CAUTION - There is a danger of explosion if the
onboard battery is installed backwards, which will reverse its
polarities. The positive side of the battery should be facing up and
the negative side should facing the motherboard. This battery must
be replaced only with the same or an equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions. See Figure 4-1.
z CD-ROM Laser: CAUTION - this server may have come equipped with
a CD-ROM drive. To prevent direct exposure to the laser beam and
hazardous radiation exposure, do not open the enclosure or use the
unit in any unconventional way.