User`s manual

C-4
C7Q67 Motherboard User's Manual
When a DOS prompt appears, enter AMI.BAT BIOSname.### at the prompt. 8.
Note: Do not interrupt this process until BIOS ashing is completed.
After seeing the message that BIOS update is completed, unplug the AC pow-9.
er cable from the power supply to clear CMOS, and then plug the AC power
cable in the power supply again to power on the system.
Press <Del> continuously to enter the BIOS Setup utility. 10.
Press <F3> to load default settings. 11.
After loading default settings, press <F4> to save the settings and exit the 12.
BIOS Setup utility.