User`s manual

Chapter 4: AMI BIOS
4-15
PS2 KB/MS Wake up
This feature is used to awaken the system from Standby mode by a PS/2 mouse or
PS/2 keyboard. This must be enabled in the system level and Operating System
(O/S) as well, if supported).
S1 (OS Control) - Enables system wake up from S1 (default).
S5 (OS Control) - Enables system wake up from S1/S3/S4/S5.
Force Enable - Wake up support is always enabled regardless whether it is
disabled in the O/S.
Force Disable - Wake up support is always disabled regardless whether it is
enabled in the O/S.

TrustedComputingConguration
TPM Support
Select Enable to activate support for trusted platforms (TPM 1.1/1.2) and allow
the BIOS to automatically download the drivers needed to provide support for the
platforms specied. The options are Disable and Enable.
TPM State
This feature changes the TPM State. The options are Disable and Enable. Note:
The system will restart to change the TPM State.
Pending TPM operation
Displays any TPM-related operation by the system.
The following are informational status messages that indicate the current TPM
State:
TPM Enabled Status
TPM Active Status
TPM Owner Status