User`s manual

Chapter 4: AMI BIOS
4-9
IGD Memory
This feature selects the amount of memory for the Integrated Graphics
Device (IGD). The options are Disabled, 32M, 64M and 128M.
Render Standby
This feature enables or disables render standly by the Internal Graphics
Device (IGD). The options are Disabled and Enabled.
IGD Multi-Monitor
This feature enables or disables multi-monitor support by the Internal
Graphics Device (IGD). The options are Disabled and Enabled.

SouthBridgeConguration
This item displays the current South Bridge Revision.
GbE Controller
Select Enabled to enable the onboard gigabit Ethernet controller. The
settings are Enabled and Disabled.
Wake on LAN from S5
Select Enabled to enable the capabiltiy to 'wake-up' the system from the
S5 power state (Soft Off State) through the Ethernet controller. The set-
tings are Enabled and Disabled.
Legacy USB Support
This feature enables support for legacy USB devices. Select Auto to dis-
able legacy support if USB devices are not present. Select Disable to
have USB devices available only for EFI applications. The options are
Enabled, Disabled and Auto.
Port 60/64 Emulation
This feature enables or disables I/O port 60h/64h emulation support.
This should be enabled for complete USB keyboard legacy support for
non-USB-aware Operating Systems. The options are Disabled and
Enabled.
BIOS EHCI Hand-Off
This item is for Operating Systems that does not support Enhanced Host
Controller Interface (EHCI) hand-off. When enabled, EHCI ownership