User`s manual

4-4

C2SBC-Q User's Manual

Native Mode Operation

Select Serial ATA for SATA or select Auto (Native Mode) for ATA. The options are:

Serial ATA and Auto.

Serial ATA (SATA) RAID Enable

Select Enable to enable Serial ATA RAID Functions. (For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. When this item

is set to Enabled, the item: ICH RAID Code Base will be available for you to select

either Intel or Adaptec HOST RAID ﬁ rmware to be activated. Is this item is set to

Disabled, the item SATA AHCI Enable will be available.) The options are Enabled

and Disabled.

SATA AHCI Enable

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take

caution when using this function. This feature is for advanced programmers only.

The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the

IAA driver is used.) The options are Enabled and Disabled.

uSATA Port0/SATA Port1/SATA Port2/SATA Port3/SATA

Port4/SATA Port5/Ext. Primary Master/Slave

These settings allow the user to set the parameters of slots indicated above. Hit

<Enter> to activate the following sub-menu screen for detailed options of these

items. Set the correct conﬁ gurations accordingly. The items included in the sub-

menu are the following: