Datasheet

6-4

AS1010P-8(R)/1010P-T(R) User's Manual

Figure 6-2. Removing the Fan Housing

6-4 Drive Bay Installation/Removal

Accessing the Drive Bays

SCSI/SATA Drives: Because of their hotswap capability, you do not need to access

the inside of the chassis or power down the system to install or replace SCSI/SATA

drives. Proceed to the next step for instructions.

Note: You must use standard 3.5" SCSI/SATA drives in the 1010P-8(R)/1010P-

T(R).

DVD/CD-ROM/Floppy Disk Drives: For installing/removing a DVD/CD-ROM or

ﬂ oppy disk drive, you will need to gain access to the inside of the system by remov-

ing the top cover of the chassis. Proceed to the "DVD/CD-ROM and Floppy Drive

Installation" section later in this chapter for instructions.

Note: Only "slim" DVD/CD-ROM and ﬂ oppy drives will ﬁ t into the 1010P-8(R)/1010P-

T(R).