Datasheet

1-2

AS1010P-8(R)/1010P-T(R) User's Manual

1-2 Serverboard Features

At the heart of the 1010P-8(R)/1010P-T(R) lies the H8SSP-8/H8SSP-i, a single

processor serverboard based on the ServerWorks HT-2000/1000 chipset. Below

are the main features of the H8SSP-8/H8SSP-i (see Figure 1-1 for a block diagram

of the chipset).

Processors

The H8SSP-8/H8SSP-i supports a single AMD Opteron 200 series 64-bit processor

in a 940-pin microPGA ZIF socket.

Memory

The H8SSP-8/H8SSP-i has four 184-pin DIMM sockets that can support up to 16

GB of registered ECC DDR333/266 or up to 8 GB of registered ECC DDR400

SDRAM. Memory can be installed in either a single or a dual channel (interleaved)

conﬁ guration, which requires modules of the same size and speed to be installed

in pairs. Please refer to Chapter 5 for details on installing memory.

SCSI Subsystem

The H8SSP-8 (only) includes onboard Adaptec AIC-7902W dual-channel SCSI

controller, which supports four 80-pin SCA Ultra320 SCSI hard drives (SCA =

Single Connection Attachment). The SCSI drives are connected to a backplane

that provides power, bus termination and conﬁ guration settings. The SCSI drives

are hot-swappable units.

Serial ATA Subsystem

The H8SSP-8/H8SSP-i includes a SATA controller, which is integrated into the

ServerWorks HT-1000. This controller supports four SATA hard drives. The SATA

drives are connected to a backplane that provides power, bus termination and

conﬁ guration settings. The SATA drives are hot-swappable units.

 One (1) passive heatsink for 1U systems (optional, SNK-P0012)

 One (1) CD containing drivers and utilities

Note: (B) indicates the item is available in black.