AOC-UTG-I2 Add-on Card User’s Manual Revison 1.
AOC-UTG-I2 Add-on Card User’s Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc.
Preface Overview This manual is written for system integrators, PC technicians and knowledgeable PC users who intend to integrate Supermicro's AOC-UTG-I2 add-on card. Product Features The AOC-UTG-I2 offers the following features: • High-performing, PCI-E 10Gb Ethernet connection ideally suited for demanding enterprise applications. • Dual-port Intel® 82598EB with two CX4 connectors. • CX4-to-Optical module/cable (optional). • PCI-E x8 to maximize performance (PCI-E Gen 2 compatible).
AOC-UTG-I2 Add-on Card User’s Manual An Important Note to Users All images and layouts shown in this user's guide are based upon the latest PCB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual. Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required before any warranty service will be rendered.
Preface Contacting SuperMicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML ‘s-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.
AOC-UTG-I2 Add-on Card User’s Manual Notes iv
Table of Contents Chapter 1 Safety Guidelines .......................................................... 1-1 1-1 ESD Safety Guidelines ..................................................................... 1-1 1-2 General Safety Guidelines ............................................................... 1-1 1-3 An Important Note to Users ............................................................. 1-1 Chapter 2 Connectors and Indicators ......................................
AOC-UTG-I2 Add-on Card User’s Manual Notes vi
Chapter 1 Safety Guidelines To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. 1-1 ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic components. To prevent damage to your system, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. • Use a grounded wrist strap designed to prevent static discharge.
AOC-UTG-I2 Add-on Card User’s Manual Notes 1-2
Chapter 2 Connectors and Indicators 2-1 Front Connectors and Indicators Connectors and indicators are used to attach the add-on card to the system’s mainboard. Figure 2-1. AOC-UTG-I2 Add-on Card Front Connectors and Indicators 1 2 1 2 Table 2-1 lists the add-on card’s front connectors and indicators. Table 2-1.
AOC-UTG-I2 Add-on Card User’s Manual LAN Ports LAN ports allow the Add-on card to connect a maximum of two network cables (CX4 connectors). Each LAN port provides up to 10-gigabits per second connection speed and require CX4 copper-based cables for maximum throughput.The ports are designated Port 1 and Port 2. LAN Port LEDs Each LAN port includes four LEDs. The LEDs indicate connection, activity, and connection speed (in Gigabits/second). 2-2 LED Indicators Figure 2-2.
Chapter 3 Installation 3-1 Before Installation Before installation, do the following 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry standard anti-static equipment (such as gloves or wrist strap) and/or an environment that prevents accidental electrostatic discharge. 4. Familiarize yourself with the server, motherboard, and/or chassis documentation. 5. Confirm that your operating system includes the latest updates and hotfixes.
AOC-UTG-I2 Add-on Card User’s Manual NOTE: If the FOUND NEW HARDWARE WIZARD screen is displayed on your system, click CANCEL. 3. Click on INSTALL DRIVERS AND SOFTWARE. 4. Follow the prompts to complete the installation. 3-4 Linux Installation To install the driver to a Linux system do the following: Build a Binary RPM Package 1. Run ‘rpmbuild -tb ’ 2. Replace with the specific filename of the driver.
Chapter 3: Installation NOTE: IXGBE_NO_LRO is a compile time flag. The user can enable it at compile time to remove support for LRO from the driver. The flag is used by adding CFLAGS_EXTRA=-”DIXGBE_NO_LRO” to the make file when it’s being compiled. make CFLAGS_EXTRA=”-DIXGBE_NO_LRO” install 5. Load the module: For kernel 2.6.x, use the modprobe command: modprobe ixgbe = For 2.6 kernels, the insmod command can be used if the full path to the driver module is specified.
AOC-UTG-I2 Add-on Card User’s Manual Notes 3-4
Disclaimer The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
AOC-UTG-I2 Add-on Card User’s Manual Notes
