User's Guide (1.1c)

AOC-SIMSO/SIMSO+ User's Guide
2-4
Link LED
2.2.4 LED Descriptions and Pin Denitions
#7 (D1) Heartbeat LED Indicator
Heartbeat LED (D1), located on the front
side of the AOC-SIMSO(+) card, indicates
the functionality and activity of the add-on
card. The blinking of the Heartbeat LED
indicates that the AOC-SIMSO(+) is ac-
tive. However, when the Linux OS and
the drivers are being loaded after each
AC power-on or reset, the Heartbeat
LED is off for about a minute. Then, the
Heartbeat LED will be on again to indicate
that the AOC-SIMSO(+) is active. See the
table on the right for details.
Heartbeat LED (D1)
On (Blinking) SIMSO(+): active
Off (for 1
minute)
Loading Firmware
Off (Continu-
ously)
SIMSO is not active
Activity
LED
GLAN Link Indicator
LEDColorDenition
Off No Connection or 10 Mbps
Green 100 Mbps
GLAN Activity Indicator
ColorStatusDenition
Amber Flashing Active
#8 Dedicated LAN LED Indicators
There are two LAN LED Indicators located
on the (Dedicated) LAN port on the AOC-
USB2RJ45 Add-On Card. The green LED
indicates activity, while the power LED
may be green or off to indicate the speed
of the Ethernet connection. See the tables
on the right for more information.