User's Guide (1.0)

3-19
Chapter 3: Troubleshooting
Figure 3-0
Note: The default Login ID is “ADMIN”,,which has the default password of
“ADMIN”. Both the Login ID and Password are case-sensitive.
In the IPMI design, an MD5 algorithm will encrypt the password when it is transmit
-
ted through the network. Once the password is confirmed, IPMI View will show a
CONNECTED symbol, and all available function pages will be shown as seen in
Figure 3-0. If the password is invalid, it will show a message in the Status Area
that reads “Unable to activate a session, please check ID and Password” and a
Break symbol will be shown (see Figure 2-9).