User's Guide (1.1)

3-26
AOC-SIMLC/SIMLC+ User's Guide
3. Network Basic Settings: 7KLVZLQGRZDOORZV\RXWRFRQ¿JXUHEDVLFVHWWLQJVIRU
your network.
,3$XWR&RQ¿JXUDWLRQClick on the box to activate the selection menu and select
a desired item from the list. The options are None, DHCP, and BOODP.
3UHIHUUHG+RVW1DPH'+&3RQO\Enter a Preferred Host Name in the box.
6. IP Address: Enter the IP Address for the remote host in the box.
7. Subnet Mask: Enter the net mask of the local network in the box.
8. Gateway IP Address: Enter the local network router's IP address in this box for
the accessibility of the users that are not connected to the local network.
9. Primary DNS Server IP Address: Enter the IP Address of the Primary Domain
Name Server in the box.
10. Secondary DNS Server IP Address: Enter the IP Address of the Secondary
Domain Name Server in the box. It will be used when the Primary DNS Server can-
not be contacted.
11. Network Miscellaneous Setting: 7KLV¿HOGDOORZVWKHXVHUWRFRQ¿JXUHWKHIRO-
lowing Network Miscellaneous settings as listed below:
5HPRWH&RQVROH+77363RUWEnter the port numbers the remote host and
the HTTP server are listening. If a number is not entered in the box, the default value
will be used.
+7733RUWEnter the port number the HTTP server is listening. If a number is not
entered in the box, the default value will be used.
66+3RUWEnter the port number the SSH server is listening. If a number is not
entered in the box, the default value will be used.
15. Bandwidth Limit: Enter the maximum bandwidth value for network interfacing.
The value should be in Kbits per second.
(QDEOH66+$FFHVVClick this box to enable SSH Access.
17. Disable Setup Protocol: Check this box to disable the function of Setup Proto-
col for the SIMLC/SIMLC+ card.
18. LAN Interface Setting: 7KLV¿HOGDOORZVWKHXVHUWRFRQ¿JXUHWKHIROORZLQJ/$1
Interface settings as listed below:
19. LAN Interface Speed: Click on the arrow on the right to activate the selec-
tion menu and select a desired speed. The options are: Auto-detect, 10 Mega bits
per second or 100 Mega bits per second. If Auto-detect is selected, LAN Interface
6SHHGZLOOEHVHWDWWKHRSWLPL]HGVSHHGEDVHGRQ WKH V\VWHPFRQ¿JXUDWLRQVGH-
tected by the OS.
19. LAN Interface Duplex Mode: Click on the arrow on the right to activate the se-
lection menu to select a desired LAN Interface Duplex Mode. The options are: Auto-
detect, Half Duplex and Full Duplex. If Auto-detect is selected, the LAN Interface
'XSOH[0RGHZLOOEHVHWWRWKHRSWLPL]HGVHWWLQJEDVHGRQWKHV\VWHPFRQ¿JXUDWLRQV
detected by the OS.