SUPER AOC-SIMLC AOC-SIMLC+ USER'S GUIDE Rev. 1.
AOC-SIMLC/SIMLC+ User's Guide The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this user's guide, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this user's guide, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER, INC.
Chapter 1: Introduction Table of Contents Chapter I: Introduction .............................................................................1-4 1.1 Overview .................................................................................................... 1-4 1.2 IPMI Version 2.0 ........................................................................................ 1-5 1.3 Product Features ...................................................................................... 1-5 1.4 Checklist ......
AOC-SIMLC/SIMLC+ User's Guide Chapter 1 Introduction This user's guide is written for system integrators, PC technicians and knowledgeable PC users who intend to integrate Supermicro's unique IPMI 2.0 Management Utility with support of KVM-over-LAN into their systems. It provides detailed information for the application and use of the AOC-SIMLC/SIMLC+ that supports remote access for system monitoring, diagnosis and management.
Chapter 1: Introduction Power status monitoring, chassis intrusion monitoring Remote power control to power-on, power-off or reboot a system Remote access to text-based, graphic-based system information, LQFOXGLQJ %,26 FRQ¿JXUDWLRQV DQG 26 RSHUDWLRQ LQIRUPDWLRQ .90 (See the Note below.) Remote management of utility/software applications Provides Network Management Security via remote access/console redirection.
AOC-SIMLC/SIMLC+ User's Guide 1.6 Contacting Supermicro +HDGTXDUWHUV Address: Tel: Fax: Email: Web Site: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. +1 (408) 503-8000 +1 (408) 503-8008 marketing@supermicro.com (General Informaion) support@supermicro.com (Technical Support) www.supermicro.com Europe Address: Tel: Fax: Email: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands +31 (0) 73-6400390 +31 (0) 73-6416525 sales@supermicro.
&KDSWHU 7HFKQLFDO 6SHFL¿FDWLRQV DQG ,QVWDOODWLRQ Chapter 2 7HFKQLFDO 6SHFL¿FDWLRQV DQG +DUGZDUH Installation 2.1 AOC-SIMLC/SIMLC+ Component and Jumper Locations Front View 1 V-RAM 2 SDRAM SDRAM 3 3 SIMLC (Note RU LQGLFDWHV 3LQ 2.1.1 Front Component and LED Descriptions #1. D3: Standby Power LED Indicator When this LED is on, the standby power is on. Be sure to remove power cables before installing or removing components. #2. VRAM (64Mb/166MHz) #3.
AOC-SIMLC/SIMLC+ User's Guide 2.1.2 Rear Component and LED Locations Rear View Kira 100 Processor 3 Heartbeat LED 1 Flash Memory 2 (Note RU LQGLFDWHV 3LQ Rear Side Components 1. The (independent) Kira 100 Processor 2. Flash Memory 3. Heartbeat LED 5HDU /(' 'HVFULSWLRQ DQG 3LQ 'H¿QLWLRQV +HDUWEHDW /(' ,QGLFDWRU Heartbeat LED (marked #3 above), located on the rear side of the AOCSIMLC(+) card, indicates the functionality and activity of the add-on card.
&KDSWHU 7HFKQLFDO 6SHFL¿FDWLRQV DQG ,QVWDOODWLRQ 2.
AOC-SIMLC/SIMLC+ User's Guide 2.3 Installing the AOC-SIMLC/SIMLC+ Add-On Card 2.3.1 Safety Guidelines To avoid personal injury and property damage, please carefully follow all the safety steps listed below when installing the AOC-SIMLC/SIMLC+ into your system. ESD Safety Guidelines Electro Static Discharge (ESD) can damage electronic components. To prevent damage to your system, it is important to handle it very carefully.
&KDSWHU 7HFKQLFDO 6SHFL¿FDWLRQV DQG ,QVWDOODWLRQ 2.3.2 SIMLC/SIMLC+ Slot Locations To properly use the AOC-SIMLC/SIMLC+, be sure to install it in the right slot. Refer to the MB layouts below for SIMLC/SIMLC+ slot locations. 1. The X7DB8/X7DBE/X7DB8+/X7DBE+/X7DB8-X/X7DBE-X/X7DB3 Series SIMLC(+) Slot (Slot 7) 2. The X7DA8/X7DAE/X7DVA-8/X7DVA-E/X7DVL-3//X7DVL-i Series (Note) SIMLC(+) Slot (Slot 7) 3.
AOC-SIMLC/SIMLC+ User's Guide Notes 2-6
Chapter 3: Software Application and Usage Chapter 3 Software Application and Usage With an independent I/O processor embedded in Raritan's Kira 100 RISC System Chip, the AOC-SIMLC/SIMLC+ Add-On Card allows the user to access, monitor, manage and interface with systems that are in remote locations via LAN. (See the Note on Page 3-2.
AOC-SIMLC/SIMLC+ User's Guide To Access the SIM1U/SIM1U+ Card from a Computer 1. Choose a computer that is connected to the same network and open the browser. 2. Type in the IP address of each server that you want to connect in the address bar in your browser. 3. Once the connection is made, the Log In screen as shown below displays. To Log In Once you are connected to the remote server, the following Log In screen displays.
Chapter 3: Software Application and Usage +RPH 3DJH Home Console Remote Console Screen Logout 4 2 Function Keys 1 9 3 5 6 7 8 %XWWRQV IURP WKH +RPH 3DJH 1 +RPH: Click this icon to return to the Home Page. 2 Console: Click this icon to go to the Remote Console Screen. 3 Remote Console Screen: Displayed in the window is Remote Console Screen. Click on this window to go to the Remote Console Screen. 4 Logout: Click on this icon to log out.
AOC-SIMLC/SIMLC+ User's Guide )XQFWLRQ .H\V IURP WKH +RPH 3DJH 9 &OLFN RQ WKHVH IXQFWLRQ NH\V WR XVH WKH IXQFWLRQV DV VSHFL¿HG EHORZ 1 2 3 4 5 6 7 1. Remote Control: Click on this icon for remote access and management of Video Console Redirection. 2. Virtual Media: Click on this icon to use virtual remote media devices. 6\VWHP +HDOWK: Click on this icon to view and manage health monitoring for remote systems 4. User Management: Click on this icon for User Management. 5.
Chapter 3: Software Application and Usage )XQFWLRQV /LVWHG RQ WKH +RPH 3DJH 3.2.1. Remote Control Click on the icon of Remote Control to activate its submenus-KVM Console and Remote Power as listed below. a. KVM Console (See the note on Page 3-1) &OLFN RQ WKLV LWHP WR FRQ¿JXUH NH\ERDUG PRXVH RU YLGHR VHWWLQJV IRU WKH UHPRWH host. Remote Console Screen 1 2 3 4 Explanation of Functions In the Single/Synchronized Mouse Mode, this cursor indicates the sys1 tem that is currently active.
AOC-SIMLC/SIMLC+ User's Guide b. Remote Power &OLFN RQ WKLV LWHP WR FRQ¿JXUH WKH SRZHU VHWWLQJV IRU 5HPRWH &RQVROH DV VKRZQ below. Remote Power Screen 1 2 3 Explanation of Functions 1 Power On: Click on this icon to power on the remote host. 2 Power Down: Click on this icon to power down the remote host. 3 Reset: Click on this icon to reset the remote host.
Chapter 3: Software Application and Usage 3.2.2. Virtual Media Click on the Virtual Media icon on the Home Page to activate its submenus-Floppy Disk, CD-ROM, Drive Redirection and Options as listed below. a. Floppy disk Floppy Disk Screen 2 3 1 4 5 6 7 Explanation of Functions Floppy Disk: Click on this function key to upload the data 1 VWRUHG LQ WKH ORFDO ÀRSS\ GLVN LPDJH WR WKH UHPRWH KRVW 2 Active Image (Drive1): This window displays the data that has been uploaded to Drive 1 of the remote host.
AOC-SIMLC/SIMLC+ User's Guide b. CD-ROM Image CD-ROM Image Screen 2 3 1 4 5 6 7 8 9 10 Explanation of Functions 1 2 3 4 CD-ROM image: Click on this function key to share data stored in your local CD-ROM drive with other users in the remote host through the Windows Share application via USB. Active Image (Drive1) 7KLV ZLQGRZ GLVSOD\V WKH ¿OH name of the data currently active in host Drive 1.
Chapter 3: Software Application and Usage c. Drive Redirection Drive Redirection Screen 2 3 1 4 5 6 7 8 Explanation of Functions Drive Redirection: Click on this function key to make lo1 cal drives accessible for other users via console redirection. This function allows you to share your local drives (Floppy, CD-ROM and HDDs) with users in the remote systems. 2 Active Image (Drive1) 7KLV ZLQGRZ GLVSOD\V WKH ¿OH name of the data currently active in host Drive 1.
AOC-SIMLC/SIMLC+ User's Guide d. Virtual Media Options Virtual Media Options Screen 2 4 1 Explanation of Functions 1 2 3 4 Options: Click on this function key to activate the Virtual Media sub-menu. Virtual Media Options: Use this option to disable or enable USB MASS storage in the remote host. Check this box to disable the function of Virtual Media Options to prevent data stored in a local drive from being accessed, or uploaded by the user in the remote host.
Chapter 3: Software Application and Usage 6\VWHP +HDOWK Click on the System Health icon on the Home Page to activate its submenus: Chassis Control, Monitor Sensor, System Event Log and Alert settings as listed below. 6\VWHP +HDOWK 6FUHHQ a. Chassis Control Chassis Control Screen 2 1 3 1 2 Chassis Control Chassis Control: Click on this function key to access Health Monitoring information on the remote chassis. The items monitored include 1. Chassis Information 2. Power Control.
AOC-SIMLC/SIMLC+ User's Guide 3 Power Control The following Power Control items are included: Refresh: Click on this icon to refresh the screen of the remote host. Power On: Click on this icon to power on the system for the remote host. Power Down: Click on this icon to power down the system for the remote host. Power Cycle: Click on this icon to power down the system for the remote host and turn it back on later. Reset: Click on this icon to reset the remote console.
Chapter 3: Software Application and Usage b.
AOC-SIMLC/SIMLC+ User's Guide Health Monitoring Sensor Information on the Remote Host Temperature Monitoring Voltage Monitoring Fan Control Physical Security Module/Board CPU0 Internal E. Module/Board CPU1 Internal E. Module/Board CPU Overheat CPU1 Temperature (Temp A, Temp B) CPU2 Temperature (Temp A, Temp B) System Temperature CPU1 VCore CPU2 VCore 3.3V 5V, 5VSB +12V, -12V 1.
Chapter 3: Software Application and Usage c. System Event Log System Event Log Screen 1 1 System Event Log: Click on this function key to display the System Health Event Log for the remote host system.
AOC-SIMLC/SIMLC+ User's Guide d. Alert Settings Alert Settings Screen 2 3 4 1 1 Alert Settings: Click on this function key to activate the alert settings submenu for the remote host system. The items monitored include: 1. Filter List, 2. Policy List and 3.
Chapter 3: Software Application and Usage 3.2.4. User Management Click on the User Management icon on the Home Page to activate its submenus: Change Password, Users & Group and Permissions as listed below. User Management Screen 1 a. Change Password 3 4 2 1 User Management: Click on this icon to activate the User Management submenu.
AOC-SIMLC/SIMLC+ User's Guide b. Users & Groups-User Management and Group Management 2 3 4 5 6 7 8 9 12 10 1 13 111 14 16 15 18 17 19 3 20 15 16 17 18 1 Users & Groups: Click on this icon to activate the Users & Groups submenu. 2 User Management: This window displays the user's information. 3 Existing users: Select an existing user for information updates. Once a user is seOHFWHG FOLFN RQ WKH /RRNXS LFRQ RQ ULJKW WR YLHZ XVHU LQIRUPDWLRQ 4 New user name: .
Chapter 3: Software Application and Usage 14 IPMI Privilege Level: Click on the arrow key on the right to activate the Privilege 6HOHFWLRQ PHQX 7KH ,30, 3ULYLOHJH /HYHO FRQWDLQV ¿YH FDWHJRULHV 1R $FFHVV 8VHU Operator, Administrator and OEM.
AOC-SIMLC/SIMLC+ User's Guide c. Permissions 3 2 4 5 6 1 1 Permissions: Click on this icon to activate the User/Group Permissions submenu. 2 Show Permissions for User/Group: click on the arrow on the right to activate the user/group permissions selection menu. 3 Update: Click this icon to update permissions information. 4 Effective Permissions: 7KLV ¿HOG LQGLFDWHV WKH DFWXDO SHUPLVVLRQV D XVHU JURXS has.
Chapter 3: Software Application and Usage 3.2.5. KVM Settings (See the Note on Page 3-1) Click on the KVM Settings icon on the Home Page to activate its submenus: User Console and Keyboard/Mouse as listed below. a.
AOC-SIMLC/SIMLC+ User's Guide a. User Console 1. User Console: Click on this icon to activate the User Console submenu. 2. User Selection: 7KLV ¿HOG DOORZV \RX WR GHFLGH ZKLFK JURXS WKH XVHU EHORQJV WR Click on the arrow on the right to activate the selection menu and highlight the name of the group to select it. 3. Update: Once you've selected the group name, click on Update to save the selections. 4.
Chapter 3: Software Application and Usage 14. Miscellaneous Remote Console Settings: This window allows you to specify the following Remote Console Settings. 15. Start in Monitor Mode: Check this box to enable the Start in Monitor Mode which will allow data to be displayed in the remote monitor as soon as Remote Console is activated. (The data displayed in the remote monitor is ready-only.) 16.
AOC-SIMLC/SIMLC+ User's Guide b. Keyboard/Mouse (See the Note on Page 3-1.) KVM Settings: Keyboard/Mouse 2 3 4 5 6 7 8 1 1. Keyboard/Mouse: &OLFN RQ WKLV IXQFWLRQ NH\ WR FRQ¿JXUH WKH IROORZLQJ .H\ERDUG Mouse Settings. 2. Key Release Timeout: &KHFN WKLV ER[ WR HQDEOH WKH IXQFWLRQ RI .H\ 5HOHDVH 7LPHRXW ZKLFK ZLOO VHW WKH WLPH OLPLW IRU D NH\ WR EH SUHVVHG E\ WKH XVHU 3. Timeout after_______msec: ,I WKH .
Chapter 3: Software Application and Usage 3.2.6. Device Settings Click on the Device Settings icon on the Home Page to activate its submenus: NetZRUN '\QDPLF '16 6HFXULW\ &HUWL¿FDWH 'DWH 7LPH (YHQW /RJ DQG 6103 6HWWLQJV as listed below. a. Network Device Settings: Network 3 4 5 6 7 8 9 10 111 12 13 14 15 16 1 17 2 18 19 20 a. Network 1.
AOC-SIMLC/SIMLC+ User's Guide 3. Network Basic Settings: 7KLV ZLQGRZ DOORZV \RX WR FRQ¿JXUH EDVLF VHWWLQJV IRU your network. ,3 $XWR &RQ¿JXUDWLRQ Click on the box to activate the selection menu and select a desired item from the list. The options are None, DHCP, and BOODP. 3UHIHUUHG +RVW 1DPH '+&3 RQO\ Enter a Preferred Host Name in the box. 6. IP Address: Enter the IP Address for the remote host in the box. 7. Subnet Mask: Enter the net mask of the local network in the box. 8.
Chapter 3: Software Application and Usage b. Dynamic DNS Device Settings: Dynamic DNS 2 3 4 5 6 7 8 9 10 1 b. Dynamic DNS 1. Dynamic DNS: &OLFN RQ WKLV IXQFWLRQ NH\ WR DFWLYDWH LWV VXEPHQX DQG FRQ¿JXUH the following Dynamic DNS (-Domain Name Server) settings as listed below. 2. Enable Dynamic DNS: Check this box to enable the Dynamic DNS service. 3. Dynamic DNS Server www.dyndns.org: Click this link to access the DynDNS web site. This is the server name where the DDNS Service is registered. 4.
AOC-SIMLC/SIMLC+ User's Guide 9. Check Interval: Enter the interval for the IPMI to report to the Dynamic DNS again. 10. Delete Saved External IP Address: Click on the Delete Icon to delete the IP Address for an external system that has been previous entered and saved.
Chapter 3: Software Application and Usage c. Security Device Settings: Security 2 3 4 5 6 7 8 9 111 10 12 13 14 15 16 17 1 c. Security 1. Security: &OLFN RQ WKLV IXQFWLRQ NH\ WR DFWLYDWH LWV VXEPHQX DQG FRQ¿JXUH WKH IROlowing Security settings as listed below. 2. Encryption Settings: 7KLV ZLQGRZ DOORZV \RX WR FRQ¿JXUH HQFU\SWLRQ VHWWLQJV )RUFH +7736 IRU :HE $FFHVV Check this box to enable the function-Force HTTPS for Web Access.
AOC-SIMLC/SIMLC+ User's Guide 6. Enable IP Access Control: Check this box to enable the function of IP Access Control. This function is used to limit user access to the network by identifying them by their IP addresses. (This function is available to the LAN interface only.) 7.
Chapter 3: Software Application and Usage G &HUWL¿FDWH 'HYLFH 6HWWLQJV &HUWL¿FDWH 2 3 4 5 6 7 8 9 10 111 12 13 1 G &HUWL¿FDWH &HUWL¿FDWH &OLFN RQ WKLV IXQFWLRQ NH\ WR DFWLYDWH LWV VXEPHQX DQG FRQ¿JXUH WKH IROORZLQJ &HUWL¿FDWH VHWWLQJV DV OLVWHG EHORZ &HUWL¿FDWH 6LJQLQJ 5HTXHVW &65 7KLV ZLQGRZ DOORZV \RX WR GH¿QH WKH &HUWL¿FDWH 6LJQLQJ 5HTXHVW &65 IRUP 7KH ,30, XVHV WKH 6HFXUH 6RFNHW /D\HU 66/ SURWRFRO IRU HQFU\SWHG QHWZRUN WUDI¿F EHWZHHQ LWVHOI DQG WKH UHPRWH KRVW VH
AOC-SIMLC/SIMLC+ User's Guide 3. Common Name: (QWHU WKH IXOO\ TXDOL¿HG GRPDLQ QHWZRUN QDPH RI WKH ,30, 4. Organization Unit: Enter the name of the department within an organization that the IPMI belongs to. 5. Organization: Enter the name of the organization that the IPMI belongs to. 6. Locality/City: Enter the name of the city or the location where the organization is located. 7. State/Province: Enter the name of the state/province where the organization is located. 8.
Chapter 3: Software Application and Usage e. Date/Time Device Settings: Date/Time 2 3 4 5 6 1 e. Date/Time 1. Date/Time: Click on this function key to activate its submenu. This feature allows you to set the internal realtime clock for your SIMLC/SIMLC+ card. 2. UTC Offset: This window allows you to offset the UTC Timer. 8VHU 6SHFL¿HG 7LPH This option allows the user to enter the time values for the SIMLC/SIMLC+ internal realtime clock. 4.
AOC-SIMLC/SIMLC+ User's Guide f.
Chapter 3: Software Application and Usage f. Event Log 1. Event Log: Click on this function key to activate its submenu. This feature allows you to set Event Log Targets and Event Log Assignment. 2. Event Log Targets: This section allows you to manually set the event log targets and settings. 3. List Logging Enabled: Check this box to activate the event-logging list. To show WKH HYHQW ORJ OLVW FOLFN RQ (YHQW /RJ RQ WKH 0DLQWHQDQFH SDJH 7KH PD[LPXP number of log list entries is 1,000 events.
AOC-SIMLC/SIMLC+ User's Guide g. SNMP Settings Device Settings: SNMP Settings 2 3 4 5 6 7 1 g. SNMP Settings 1. SNMP Settings: Click on this function key to activate its submenu. This feature DOORZV \RX WR FRQ¿JXUH 6LPSOH 1HWZRUN 0DQDJHPHQW 3URWRFRO VHWWLQJV 2. Enable SNMP Agent: Check the box to enable the SNMP Agent and allow it to interface with your SIMLC/SIMLC+ card. 3. Read Community: Enter the name of the SNMP Community from which you will retrieve information via SNMP. 4.
Chapter 3: Software Application and Usage 5. System Location: Enter the physical location of the SNMP host server. This locaWLRQ ZLOO EH XVHG LQ UHVSRQVH WR WKH 6103 UHTXHVW DV V\V/RFDWLRQ 6. System Contact: Enter the name of the contact person for the SNMP host server. 7KLV YDOXH ZLOO EH UHIHUUHG WR DV V\V&RQWDFW 7. Click here to view the SNMP MIB: Click this link to view the SMLP card SNMP 0,% ¿OH 7KLV ¿OH PD\ EH QHFHVVDU\ IRU DQ 6103 FOLHQW WR LQWHUIDFH ZLWK WKH 6,0/& SIMLC+ card.
AOC-SIMLC/SIMLC+ User's Guide 3.2.7 Maintenance Click on the Maintenance icon on the Home Page to activate its submenus: Device Information, Event Log, Update Firmware and Unit Reset Settings as listed below. a. Device Information Maintenance: Device Information 2 3 1 1. Device Information: Click on this function key to activate its submenu. This feaWXUH GLVSOD\V WKH LQIRUPDWLRQ RI WKH 6,0/& 6,0/& FDUG DQG LWV ¿UPZDUH 2.
Chapter 3: Software Application and Usage b. Event Log Maintenance: Event Log 1 1. Event Log: Click on the function key on the left to activate the Event Log submenu. Once the submenu is displayed, the Event Log List will display. The Event Log List contains the information of events that are recorded by the SIMLC/SIMLC+ in the order of Date/Time, Types, and the descriptions of the events including the IP address(es), person(s) and activities involved .
AOC-SIMLC/SIMLC+ User's Guide c. Update Firmware Maintenance: Update Firmware 3 2 4 1 1. Update Firmware: &OLFN RQ WKLV IXQFWLRQ NH\ WR HQDEOH 8SGDWH )LUPZDUH 2/3. Firmware File: (QWHU WKH QDPH RI WKH ¿UPZDUH \RX ZDQW WR XSGDWH RU FOLFN RQ WKH %URZVHU LFRQ WR VHOHFW WKH ¿UPZDUH ¿OH 4. Update: &OLFN RQ WKH 8SORDG LFRQ WR XSORDG WKH ¿UPZDUH ¿OH WR WKH VHUYHU IRU WKH update. (Note 7KLV SURFHVV LV QRW UHYHUVLEOH RQFH WKH ¿UPZDUH LV XSGDWHG VR SURceed with caution.
Chapter 3: Software Application and Usage d. Unit Reset Maintenance: Unit Reset 2 3 4 5 1 1. Unit Reset: This feature allows you to reset the following components: 2. Reset Keyboard/Mouse: &OLFN WKH 5HVHW LFRQ WR UHVHW .H\ERDUG PRXVH 3. Reset USB: &OLFN WKH 5HVHW LFRQ WR UHVHW WKH 86% PRGXOH 4. Reset Video Engine: &OLFN WKH 5HVHW LFRQ WR UHVHW 9LGHR DQG LWV FRQWUROOHU 5.
AOC-SIMLC/SIMLC+ User's Guide 3.3 Remote Console Main Page Home 1 Log Out Click to Open Console 2 4 3 9 Remote Console Preview Screen Refresh 5 6 Power On 7 Power Down 8 Reset After you have entered the correct IP address for your remote console and typed in correct user name and password, you should be connected to the remote console. When the remote console is connected, the Remote Console window displays as shown above.
Chapter 3: Software Application and Usage 3.3.1 Remote Console Options $IWHU WKH UHPRWH FRQVROH VFUHHQ DSSHDUV FOLFN RQ WKH EXWWRQ 2SWLRQ RQ WKH YHU\ upper right corner to display the Options Menu as shown below.Options Menu Options a. Options Menu Items No KB/Mouse: The following items are included in the Options Menus: (Crossed-out) 1. Monitor Only: &OLFN RQ WKH 0RQLWRU 2QO\ EXWWRQ WR WXUQ WKH IXQFWLRQ RI 0RQLWRU 2QO\ RQ RU RII ,I WKH IXQFWLRQ RI 0RQLWRU 2QO\ LV VHOHFWHG WKH .
AOC-SIMLC/SIMLC+ User's Guide 6. Chat Window: This item allows the user to communicate with other users logged in the same remote host by clicking on the Chat Window button. The screen below shows a Chat Window displayed in a scaled down remote console screen. Remote Console Window Title Bar (Scaled-down to 50%) Chat Window button 1 Chat Window 2 Frame 3 4 User's Identity Label Chat line For your reference, the items shown on the Chat Window screen are listed below: 1.
Chapter 3: Software Application and Usage 7. Video Settings: This item allows the user to set the monitor display settings by FOLFNLQJ RQ WKH 9LGHR 6HWWLQJV EXWWRQ PDUNHG EHORZ $IWHU \RX YH FOLFNHG WKH Video Settings button, the submenu displays as shown below. Video Settings 1 Button 2 3 Video Settings Submenu 4 5 7 6 Use your cursor pointer to click on the triangles (marked 2 and 3) to adjust the setting for each of the following items: i. Brightness ii. Contrast Red iii.
AOC-SIMLC/SIMLC+ User's Guide 8. Soft Keyboard: This item allows the user to use the soft keys that have been SUH LQVWDOOHG LQ WKH 6RIW .H\ERDUG RI WKH SDUWLFXODU ODQJXDJH VHOHFWHG $IWHU \RX YH clicked the Soft Keyboard button, the submenu displays as shown below. 1 2 4 3 5 Keys in the Soft Keyboard Language List 3 Keys in English Soft Keyboard i Soft Keyboard: Click on this button to use the pre-installed soft keys or to select keyboard language. ii.
Chapter 3: Software Application and Usage 9. Local Keyboard: This item allows the user to manually change the local keyboard setting for interaction with a remote host. Use this function to change the language mapping of your browser machine running the remote console host. After you have clicked Local Keyboard button, the submenu displays as shown below.
AOC-SIMLC/SIMLC+ User's Guide 10. +RW .H\V: 7KLV LWHP DOORZV WKH XVHU WR VHOHFW D SUH GH¿QHG KRW NH\ IURP D KRW key list. Once a hot key is selected, the command associated with the hot key will be sent to the remote console host for execution. After you've clicked Hot Key button, the submenu displays as shown below. 1 2 Hot Key Button Hot Key List L +RW .H\ %XWWRQ Click on this button to display a hot key list.
Chapter 3: Software Application and Usage 11. Remote Console Interface Window: This item allows the local host to interact with a remote server. Through the Remote Console Interface Window, the user can VKDUH ¿OHV VWRUHG LQ WKH ORFDO GULYH ZLWK D XVHU FRQQHFWHG WR WKH UHPRWH VHUYHU GRZQload data from a local drive to the remote server, issue commands to manage the remote server, or allow the remote server be controlled and managed by a local user logged in the remote server.
AOC-SIMLC/SIMLC+ User's Guide i./ii. Local Drive List: The box displays a list of local drives available for remote access. Select from the list a local drive that you want to make accessible for a remote server. iii. Refresh: Click this button to refresh the local drive list. iv. Write Support: Check this button to allow the remote operating system to have write access to the drive that you have selected. This function allows a user to alter, overwrite, erase and destroy data stored in the drive selected.
Chapter 3: Software Application and Usage &RQ¿UPLQJ 0HVVDJH 3-51
AOC-SIMLC/SIMLC+ User's Guide To Log Out 5HWXUQ WR WKH +RPH 3DJH DQG FOLFN RQ WKH /RJ 2XW EXWWRQ WR ORJ RXW IURP 5HPRWH Console Interface.
Chapter 4: Troubleshooting Chapter 4 Frequently Asked Questions 4XHVWLRQV +RZ GR , ÀDVK WKH ¿UPZDUH RI DQ ,30, FDUG VXFK DV D 6,0/& SIMLC+ card? Answer: /RJ RQ WR WKH ZHE LQWHUIDFH SDJH RI WKH ,30, FDUG E\ W\SLQJ WKH ,3 DGGUHVV of the card.
AOC-SIMLC/SIMLC+ User's Guide Notes 4-2
