User's Guide (1.0)

3-4
AOC-SIMSO-HTC/AOC-SIMLC-HTC User’s Manual
Step 4. If you choose to manually flash the firmware, you will see the following
screen appear. After flashing the firmware you will see a DOS prompt. On this
prompt you can configure your IPMI card using the ipmicfg utility. Please see usage
below in section 4.1.
Step 5. If you choose to manually flash the firmware, you will see the following
screen appear. After flashing the firmware you will see a DOS prompt. On this
prompt you can configure your IPMI card using the ipmicfg utility. Please see usage
below in section 4.1.