User's Guide (1.0a)

3-47

Chapter 3: Software Application and Usage

Drive Redirection Controls

The DRIVE REDIRECTION controls (Figure 3-30) display is toggled on and off when the

RIVE REDIRECTION CONTROLS DISPLAY button is clicked in the REMOTE CONSOLE

screen. See Table 3-27 for a description of each of the controls shown in this display.

Figure 3-30. Drive Redirection Controls – Displayed

Table 3-27. Drive Redirection Controls

Item Name Description

1 Connect Drive

Clicking this button brings up the S

ELECT A DRIVE TO REDIRECT

window (Figure 3-31) for locating a drive and making it accessible for

remote console interaction.

In this window select a drive from the drop-down list box provided

and press OK to confirm your selection. You may additionally click

the R

EFRESH LIST button to refresh the list in the drop-down list box,

and you may click the E

NABLE WRITE SUPPORT check box enable

write support for the drive selected.

Once you have clicked C

ONNECT, and have specified the drive you

wish to redirect to, all users logged in remote servers will have

access to the local drive that you have selected.

2 Connect ISO

Click this button to allow you to redirect an CD/DVD ISO image. This

brings up a C

HOOSE ISO IMAGE TO REDIRECT window, which allows

you to locate and select a CD ISO image.

3 Disconnect

Click this button to cancel the connection established between a

local drive and a remote server. Once you click this button, the drive

you have selected will not be accessible for remote console

interface.

Figure 3-31. Select a Drive to Redirect Window

2 3