User's Guide (1.0a)

AOC-SIMBL Add-on Card User’s Manual

3-2

3-3 Accessing the SIMBL Card from a Computer

Use the procedure below to access the AOC-SIMBL add-on card from a computer.

Computer Access of the SIMBL Card

1. Choose a computer that is connected to the same network and open the browser.

2. Type in the IP address of each server that you want to connect in the address bar in

your browser.

3. Once the connection is made the L

OG IN screen appears, as shown in Figure.

NOTE: The Readme.txt file is included in the CD that came with your shipment.

A copy of the Readme.txt file, dated 07/11/2008, is also included below.

Computer Inc.

Usage: IPMICFG params (Example: IPMICFG -m 192.168.1.123)

-m Show IP and MAC

-m IP Set IP (format: ###.###.###.###)

-a MAC Set MAC (format: ##:##:##:##:##:##)

-k Show Subnet Mask

-k Mask Set Subnet Mask (format: ###.###.###.###)

-dhcp Get the DHCP status

-dhcp on Enable the DHCP

-dhcp off Disable the DHCP

-g Show Gateway IP

-g IP Set Gateway IP (format: ###.###.###.###)

-r BMC cold reset

-garp on Enable the Gratuitous ARP

-garp off Disable the Gratuitous ARP

-fd Reset to the factory default

-ver Get Firmware revision

-vlan Get VLAN status

-vlan on [VLANtag] Enable the VLAN and set the VLAN tag

If VLANtag is not given it uses previously

.....................saved value.

-vlan off Disable the VLAN

-raw Send a RAW IPMI request and print response.

Format: NetFn LUN Cmd [Data1 ... DataN]