Datasheet

Chapter 3: Software Application and Usage
3-33
Home
Home Console
Logout
Remote Control
KVM Console
Remote Power
Virtual Media
Floppy Disk
CD-ROM Image
Drive Redirection
Options
System Health
Chassis Control
Monitor Sensors
System Event Log
Alert Settings
User Management
Change Password
Users & Groups
Permissions
KVM Settings
User Console
Keyboard/Mouse
Device Settings
Network
Dynamic DNS
Security
Certificate
Date/Time
Event Log
SNMP Settings
Maintenance
Device Information
Event Log
Update Firmware
Unit Reset
Date/Time Settings
UTC Offset
*
User specified time *
Date
/ / (mm/dd/yyyy)
Time
: : (hh:mm:ss)
Synchronize with NTP Server
Primary Time server
*
Secondary Time server
*
* Stored value is equal to the default.
http://192.168.1.200/home.asp6/16/2006 7:44:14 PM
+/- 0 h
1
1
1970
0
1
30
2
3
4
5
6
1
Device Settings: Date/Time
e. Date/Time
e. Date/Time
1. Date/Time: Click on this function key to activate its submenu. This feature allows
you to set the internal realtime clock for your SIMLP card.
2. UTC Offset: This window allows you to offset the UTC Timer.
3. User Specified Time: This option allows the user to enter the time values for the
SIMLP internal realtime clock.
4. Synchronize with NTP Server: Enter the IP Address for the NTP (Network Time
Protocol) Server that you want your SIMLP internal realtime clock to synchronize
with.
5/6. Primary Time Server/Secondary Time Server: Enter the IP Address for the pri-
mary NTP Server and the secondary NTP Server that you want your SIMLP internal
realtime clock to synchronize with. (The daylight saving time cannot be automatically
adjusted. Please manually set up the UTC offset twice a year for your timer to work
properly.)