User`s guide

6-14
AOC-USASLP-H8iR Add-on Card User's Guide
Click 10. Accepttoacceptthecongurationofthenewvirtualdisk.
Note: Click the Reclaim button if you want to undo a virtual disk that you just
dened.
Click 11. Nexttocontinuewiththenextcongurationstep.TheVirtualDiskSum-
mary window appears.
Reviewthecongurationshowninthewindow.Ifyouwanttochangesome-12.
thing, click Backandchangethecongurationparameters.
Click 13. Finishtoacceptthecongurationandstarttheinitializationprocess
(unless you selected No Initialization earlier).
UsingManualConguration:RAID50
Follow these steps to create a RAID 50 storage conguration using the Manual
CongurationmodeoftheCongurationWizard:
Creating a RAID 50 Storage Conguration
Intherst1. ManualConguration window, shown in Figure 6-5, select two
available drives in the left panel. Click the Right Arrow button to move the
selected drives to the right panel.
Click 2. Accept to accept these drives for a new RAID 5 array.
Select two more drives for a second RAID 5 array, and click 3. Accept.
To add a hotspare, select an available drive in the left panel. Select the array 4.
from the drop-down menu, and click Add Hotspare To, as shown in Figure
6-7.
To remove a hotspare from an array, select it in the right panel and click 5.
Remove HotSpare.
Click 6. Next.
The next CongurationWizardwindow appears, as shown in Figure 6-6.
The Arrays with Free Spacemenuliststhenewarraysthatyoujustdened,
plus any existing arrays with holes (free space) that could be used for a new
conguration.