User`s guide

6-10
AOC-USASLP-H8iR Add-on Card User's Guide
UsingManualConguration:RAID1
Follow these steps to create a RAID 1 storage conguration using the Manual
CongurationmodeoftheCongurationWizard:
CreatingaRAID1StorageConguration
1.IntherstManualCongurationwindow,showninFigure6-5,selecttwoavail-
able drives in the left panel. Click the Right Arrow button to move the selected
drives to the right panel.
Note: MegaRAID Storage Manager software will not allow you to select the disk
drive on which the operating system is installed or any other drives that are
alreadypartofaconguration.
2. Click Accept to accept these drives for the new RAID 1 array.
Figure6-7:ManualConguration-AddingaHotspare