User`s guide

6-9
Chapter6:Conguration
Figure6-6:ManualConguration-DeningaVirtualDisk
From the Arrays with Free Space menu, select the array to use for the new 4.
virtual disk.
In the right panel, select RAID 0 as the RAID level.5.
(Optional) Set Size (in MB) to a lower number if you do not want to use the 6.
entire available capacity for the new virtual disk.
(Optional) Change the other Virtual Disk Properties, if necessary.7.
ClickAccepttoacceptthecongurationofthenewvirtualdisk. 8.
Note: Click the Reclaim button if you want to undo a virtual disk that you just
dened.
ClickNexttocontinuewiththenextcongurationstep.TheVirtualDiskSum-9.
mary window appears.
ReviewthecongurationshownintheVirtualDiskSummarywindow.Ifyou10.
wanttochangesomething,clickBackandchangethecongurationparam-
eters
ClickFinishtoacceptthecongurationandstarttheinitializationprocess(un-11.
less you selected No Initialization earlier).