User`s guide

6-8
AOC-USASLP-H8iR Add-on Card User's Guide
UsingManualConguration:RAID0
Follow these steps to create a RAID 0 storage conguration using the Manual
CongurationmodeoftheCongurationWizard.
Figure6-5showstherstscreenthatappearswhenyouselectManualCongura-
tion.
Creating a RAID 0 Storage Conguration
IntherstManualCongurationwindow,selecttwoormoreavailabledrives1.
in the left panel. Click the Right Arrow button to move the selected drives to
the right panel.
Note: MegaRAID Storage Manager software will not allow you to select the
disk drive on which the operating system is installed or any other drives that
arealreadypartofaconguration.
Click Accept to accept these drives for the new RAID 0 array. 2.
Note: To remove a single drive from a proposed new array, select the drive
icon in the right panel and click the Left Arrow button.
Click Next. 3.
ThenextCongurationWizardwindowappears,asshowninFigure6-6.The
ArrayswithFreeSpacemenuliststhenewarraythatyoujustdened,plus
any existing arrays with holes (free space) that could be used for a new
conguration.
Figure6-5:ManualConguration-FirstManualCongurationScreen