User`s guide

6-1
Chapter6:Conguration
Chapter 6
Conguration
You use MegaRAID Storage Manager software to create and modify storage con-
gurations. RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, and RAID 60
storagecongurationsaresupported.
Important: LSI recommends that you do not use both SAS and SATA drives in the
same array. Using different drive interfaces in this way could cause unpredictable be-
havior, decreased performance, an increased error count, and decreased MTBF.
Note: Youcannotcreateormodifyastoragecongurationunlessyouarelogged
on with administrator privileges.
6-1 CreatingaNewStorageConguration
YoucanusetheMegaRAIDStorageManagerCongurationWizardtocreatenew
storage congurations. To open the MegaRAID Storage Manager Conguration
Wizard, select a controller in the left panel of the MegaRAID Storage Manager
windowandthenselectOperations,AdvancedOperations,Conguration,Congu-
ration Wizard.