User`s guide

3-3
Chapter3:WebBIOSConguration
StripeSize
Access Policy: Select Read/Write, Read Only, or Blocked.
Read Policy: Use Ahead, Normal, or Adaptive.
Write Policy: Use WBack, WThru, or Bad BBU
IO Policy:Usethissettingtoreadtoaspecicvirtualdisk.Cachedmode
reads to buffered in cached memory and in Direct mode reads are not buff-
ered.
Disk Cache Policy: Enable, Disable, and Unchanged.
Disable BGI: Selecting Yes disables background initiation.
SelectSize: Select the size for the virtual disk.
Click Accept or Reset.6.
Click Next.7.
Previewthecongurationandclick8. Accept to continue or Back to go to the
previous screen, and then click Yes to continue
3-4 Device Properties
This section gives an overview for the properties of the adapters, virtual disks,
and drives.
Adapter Properties
ClicktheAdapterPropertiestoseethedenitionsforeachadapter.Therearetwo
screens.Therstscreenisread-only.ClickNexttoseethesecondscreen,which
settings can be adjusted. For more information on these settings, see the applica-
tion Help or LSI documentation. .