User`s guide

3-1
Chapter3:WebBIOSConguration
Chapter 3
WebBIOSConguration
3-1 Introduction
TheWebBIOScongurationmanagesRAIDcongurationsonSAScontrollers.The
utility works independently of the operating system.
3-2 Accessing the WebBIOS
To Start the WebBIOS Conguration:
When prompted during bootup, press 1. CTRL + H.
In the 2. Adapter Selection screen, select an adapter.
Click 3. Start.
3-3 WebBIOSCongurationWizard
The Conguration Wizard is used to setup RAID arrays and virtuals disks. This
section includes an overview of use. For more indepth information and descriptions,
see the WebBIOS Help and other LSI documentation.
Starting the Conguration Wizard
Click the 1. CongurationWizard link located on the left hand side on the main
screen.
Selectacongurationoption:C2. learConguration, NewConguration, or
AddConguration. Note: ClearCoguration and NewConguration set-
tings will delete exising data. Create a backup before choosing an option.
Click 3. Next.
Select 4. CustomConguration, AutoCongurationwithRedundancy, or
AutoCongurationwithoutRedundancy and click Next.