User`s guide

2-2
AOC-USASLP-H8iR Add-on Card User's Guide
2-2 FrontConnectorandPinDenitions
1. Internal SAS Connector (Drive 0-3)
The Internal SAS port connects to the back-
plane allowing the motherboard to access the
hard drives. This connector supports up to four
HDD ports. This card supports SAS, SATA1,
and SATA2 drives.
Use a single port SAS "ipass" cable (Super
Micro order number CBL - 0108L-02).
2. Internal SAS Connector (Drive 4-7)
The Internal SAS port connects to the back-
plane allowing the motherboard to access the
hard drives. This connector supports up to four
HDD ports. This card supports SAS, SATA1,
and SATA2 drives.
Use a single port SAS "ipass" cable (Super
Micro order number CBL - 0108L-02).
3. I-Button
The I-Button is located on the back side of the
SAS- allows RAID operation with MegaRAID
rmware.
4. Board-to-Board Connector
This 20-pin connector interfaces with the
Battery Backup Unit (BBU). The .BBU is an
optional accessory and is not included with
this card.