User`s guide

3-6
AOC-CIBF-m1 Add-on Card User's Guide
Firmware Update Procedures
Use the following procedures for updating the AOC-CIBF-m1 add-on card rmware
for both the Linux and Windows operating systems.
Updating Firmware for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Linux.
2. Choose the MFT Linux package le and untar the package le.
3. Install the package by entering the following command:
cd mft–<ver>
./install.sh
4. Install the rmware by the following commands:
mst start
mst status *write down the pci_cr0 device name*
int –d <pci_cr0 device name> –i <rmware le name>.bin b
Updating Firmware for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Windows
2. Choose the desired MFT Windows package le.
3. Double-click to run and install the MFT package le.
4. Open the DOS command prompt and locate the MFT folder.
5. Install the rmware by entering the following commands:
mst start
mst status *write down the pci_cr0 device name*
int –d <pci_cr0 device name> –i <rmware le name>.bin b