User`s guide

3-5
Chapter 3: Installation
3. Install the driver by entering the following commands:
tar xzvf mlnx_en–<ver>.tgz
cd mlnx_en–<ver>
./install.sh
This installs the 10G drivers to your system.
Windows Drivers
Use the following procedures for installing AOC-CIBF-m1 add-on card drivers for
the Windows operating system.
Installing InniBand Drivers for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > InniBand > Windows.
2. Choose the desired InniBand Windows driver package le.
3. Double-click to run and install the driver package le.
Installing 10G Drivers for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > ConnectX_EN > Windows.
2. Choose the desired 10G Windows driver package le.
3. Double-click to run and install the driver package le.