User`s guide

3-4
AOC-CIBF-m1 Add-on Card User's Guide
3. Click on INSTALL DRIVERS AND SOFTWARE.
4. Follow the prompts to complete the installation.
3-6 Installing Drivers and Firmware
Use the procedures below to install both drivers and rmware for the AOC-CIBF-m1
add-on card for both Linux and Windows.
Linux Drivers
Use the following procedures for installing AOC-CIBF-m1 drivers for the Linux
operating system.
Installing InniBand Drivers for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > InniBand > Linux.
2. Choose the InniBand Linux driver package le.
3. Install the driver by entering the following commands:
tar xzvf OFED–<ver>.tgz
cd OFED–<ver>
./install.pl
This installs the Linux drivers to your system.
Installing 10G Drivers for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > ConnectX_EN > Linux.
2. Choose the 10G Linux driver package le.