User`s manual

4-3
Chapter 4: Chassis Setup and Maintenance
Removing Hard Drive Carriers from the Chassis
Press the release button on the drive carrier. This extends the drive carrier 1.
handle.
Use the handle to pull the drive out of the chassis. The drives are mounted in 2.
drive carriers to simplify their installation and removal from the chassis. These
carriers also help promote proper airow within the drive bays.
Warning: Except for short periods of time (while swapping
hard drives), do not operate the server with any drive carrier
removed.
!
Release Button
1
Figure 4-2: Removing Drive Carriers