User`s manual

5-5
Chapter 5 Rack Installation
Installing the Outer Rails to the Rack
Attach the short bracket to the outside of the long bracket. You must align the
pins with the slides. Also, both bracket ends must face the same direction.
Adjust both the short and long brackets to the proper distance so that the rail
fits snugly into the rack.
Secure the long bracket to the front side of the outer rail with two screws and
the short bracket to the rear side of the outer rail with three screws.
Repeat steps 1-4 for the left outer rail.
1.
2.
3.
4.
Figure 5-2: Outer Rails
Installing the Chassis Into a Rack:
Confirm that chassis inner rails and outer rails are installed on the rack.
Line chassis rails with the front of the rack rails.
Slide the chassis rails into the rack rails, keeping the pressure even on both
sides (it may be necessary to depress the locking tabs when inserting). When
the server has been pushed completely into the rack, you should hear the
locking tabs "click" into position.
(Optional) Insert and tightening the thumbscrews that hold the front of the
server to the rack.
1.
2.
3.
4.