User`s manual

C-13
Appendix C SAS-836EL Backplane Specications
Description: This cable has one SFF-8484 (32-pin) connector on one end and
iPass (SFF-8087/Mini-SAS) connector (36-pin) at the other. This cable connects
from the HBA to the SAS-836EL backplane.
Cable Name: iPass to 4-lane
Part #: CBL-0117 Length: 46 cm (18 inches)
HBA
HBA
HBA
Figure C-14: Dual Internal Host Bus Adapter
IMPORTANT: See Section C-13 of this manual, Failover with RAID Cards and
Multiple HBAs for important information on supported congurations.
Supported Internal HBA to Backplane Cables
Use the following listed cables to create connections between the internal HBA and
SAS-836EL backplane. The cables required depend on the HBA connector.
PRI_J0
PRI_J1
PRI_J2
SEC_J0 SEC_J1
SEC_J2
PRI_J0
PRI_J1
PRI_J2
SEC_J0 SEC_J1
SEC_J2
Connecting an Internal Host Bus Adapter to the
Backplane
The following section lists the most common cables used to connect the HBA to
the backplane.
Figure 3-8: Single Internal Host Bus Adapter