User`s manual
5-1
Chapter 5: Chassis Setup and Maintenance
Chapter 5
Basic Chassis Setup
and Maintenance
5-1 Overview
This chapter details the basic steps required to install components to the chassis.
The only tool you will is a Phillips screwdriver. Print this page to use as a reference
while setting up your chassis.
When coupled with an 836E series backplane, this chassis is capable of failover,
and cascading. Review Chapter 6 and the SAS-836EL appendix in this manual for
setup instructions.
5-2 Installation
Removing the Chassis Cover
Installing Hard Drives
Installing the Motherboard (Includes standoff, I/O shield and exapansion card)
Installing the Air Shroud, Rear Fan and Checking the Airow
Chassis Maintenance (Includes fans, power supply, distributor and front panel)
Review the warnings and precautions listed in the manual be-
fore setting up or servicing this chassis. These include infor-
mation in Chapter 2: System Safety and the warning/precau-
tions listed in the setup instructions.
!
Note: The SC836E1 and SC836E2 chassis support SAS drives
only. For more information, review the SAS 836EL Backplane
Specications located in the appendices of this document.
!