Datasheet

1-2

UPERSERVER 6015TW-T/6015TW-INF User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6015TW-T/6015TW-INF lies two X7DWT/X7DWT-

INF dual processor serverboards, which are based on Intel's 5400 chipset. Below

are the main features of the X7DWT/X7DWT-INF. Note that the features on each

board are doubled for the server.

Processors

Each X7DWT/X7DWT-INF supports dual Intel® 5400/5300LV/5200/5100LV Series

processors. Please refer to our web site for a complete listing of supported proces-

sors (www.supermicro.com).

Memory

The X7DWT/X7DWT-INF has eight 240-pin DIMM sockets that can support up to 64

GB of ECC FBD (Fully Buffered DIMM) DDR2-800/667/533 SDRAM. Memory can

be installed in both interleaved (dual-channel) and non-interleaved (single-channel)

conﬁ gurations. All memory modules used to populate the system should be the

same size, type and speed.

Serial ATA

The South Bridge (ESB2) of the 5400 chipset includes a Serial ATA controller for

3 Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane

that provides power, bus termination and conﬁ guration settings. RAID 0 and 1 are

supported.

PCI Expansion Slots

Each X7DWT/X7DWT-INF board has one PCI-Express 2.0 x16 slot, so two PCI-

Express 2.0 x16 slots are provided in the server. In the 6015TW-T/6015TW-INF

server conﬁ guration, riser cards have been pre-installed to support two low-proﬁ le

PCI-Express 2.0 x16 add-on cards.

Ethernet Ports

Two Intel® 82563EB network controllers are integrated into each of the serverboards

to support a total of four Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45

output).