UK82 PROFESSIONAL MANUFACTURER OF ENTERTAINMENT VOCAL SYSTEM Contact Marketing and sales Goang-Fann Co., Ltd. +886-2-26931323 sales@superlux.com.tw support@superlux.com.tw Manufacturing & logistics Superlux Enterprise Development ( Shanghai ) Co., Ltd.
UK82 PROFESSIONAL MANUFACTURER OF ENTERTAINMENT VOCAL SYSTEM FEATURES • UK82 is equipped with UHF ultra-high frequency range to provide less interference than the traditional VHF frequency range and provide higher fidelity and more reliable transmission. • UK82 features digital frequency-hopping spread spec-trum (FHSS) technique. With up to 200 selectable fre-quencies in 640MHz - 690MHz (20 selectable frequen-cies in 748MHz - 758MHz / 8 selectable frequencies in 863MHz - 865MHz).
LED DESCRIPTION ① ② ③ ④ ⑤⑥ ① Frequency ④ Lock ② Volume Adjustment ⑤ AF Signal Intensity ③ Channel ⑥ RF Signal Intensity PANEL FUNCTION DESCRIPTION A B C H I D J A CH-A Frequency - B CH-A Setting C CH-A Frequency + D Infrared Transmitter Window E CH-B Frequency - E F K L M G N F CH-B Setting K CH-B Automatically Scan H CH-A Volume - M CH-B Volume + G CH-B Frequency + CH-A Volume + J CH-A Automatically Scan L CH-B Volume - N Power ON/OFF 3
REAR PANEL DESCRIPTION ① ② ③ ④ ⑤ ⑥ ① CH-B Antenna socket ② CH-B Audio balanced output: Suitable for long-distance connection to reduce the noise derived from the cable effectively ③ Power socket: DC12V 1000mA power input socket.
RECEIVER OPERATION 1. Power ON / OFF Power ON: Press the power “ON / OFF” button to turn on the power. The LCD lights up. Power OFF: Press the power ON / OFF button for 3 secs to turn off the power. The LCD lights out. 2. Change the frequency point Press the “UP / DOWN” button to increase or decrease the frequency. After changing the frequency, the related channel indication flashes. Press “SYNC” button to confirm the change.
MICROPHONE DESCRIPTION Microphone LCD Screen Description ① Battery bar indicator. When the battery shows 1 grid, it means it is in low battery. Please change the battery immediately. ② Channel Display. ① ② Microphone Main Parts Description ① ② ① Microphone LCD screen. ② Microphone ON / OFF Button Press to turn on the microphone and press 3 seconds to turn off the microphone. ③ Battery case. Open the battery case to assemble the batteries into the battery case. (2 × AA batteries).
HANDHELD WIRELESS MICROPHONE OPERATION 1. High-Low power switch In order to adapt to different occasions, the wireless handheld microphone features the high-low power switch. When the switch is at “H” (high power) position, the transmit power of the microphone is the highest, the distance is farthest, and the power consumption is much larger. When the switch is at the “L” (low power) position, the transmit power of the microphone is lower, the distance is shorter, and the power consumption is smaller.
OFF” button for around 3 seconds, the LCD screen shows “OFF” and the microphone will be turned off after that. If the microphone will not be used for a long time, please take out the battery to avoid the alkaline battery leakage and corrode the PCB and the microphone. 4 .Assemble the battery Take out the handheld microphone and open the battery case. Follow the position indication to put into 2 x AA alkaline batteries. Then close the battery case. 5.
SPECIFICATIONS *Note:Specifications are subject to change. Modulation Type FM + Digital Auxiliary Channel S/N 95 dB (A-weighted, 1kHz 1%) THD 0.57% 1KHz Max.
SAFETY USE • For safety, please do not pull the cables but hold the plug when operation. Please do not damage the power cable to ensure the safety. • Please use the adaptor furnished only. Please make sure the power voltage meets the furnished adaptor (provide 12V DC). It may damage the equipment if using other adaptor provided by other manufacturers. • Please keep this equipment away from the environment with high temperature, humidity, dust and liquid to avoid failure.
PRECAUTIONS FOR USE 1. How to use the wireless handheld microphone properly • Please hold the center of the microphone. Please do not hold too close to the grille parts or it will affect the pickup effect of the microphone. If holding too close to the end antenna area, it will decrease the transmit efficiency of the antenna and decrease the using distance. • Adjust the distance between microphone and mouth to increase or decrease the sensitivity of the high and low sounds.
LIMITED WARRANTY For compliance with the instructions which record in the user manual, Superlux Enterprise provide one year period warranty for all material and producing quality from purchase date. This warranty term will adjust according to different country or area. Please contact local distributor to receive more information. In the validity period, if there’s any material, producing quality, or any function unavailable, Superlux will repair or replace the parts.
