Data Sheet

www.superlux.com.tw

PINK STICK

SIGNAL GENERATOR

Description

The Pink Stick is a random noise generator with built-

in XLR-3M connector. It can be directly plugged into to

the microphone pre-amplifier which provides phantom

power, so no battery is needed. Its rotary switch selects

between pink noise, 1 kHz tone, and pulse tone. There

is a mute setting between each signal setting to ensure

operational safety for the connected equipment.

Features

• Built-in pink noise, 1 kHz tone, and pulse tone.

• Extremely compact size.

• Integral XLR3M connector for direct plug-in to the

microphone pre-amplier.

• Phantom powered.

• No batteries required.

• Mute setting in between each signal for protection.

Specications

Type Balanced mic level output

Noise Pattern Pink noise, 1kHz, pulse

Output Level Pink noise: -14dBu

1 kHz: -4.5dBu

Pulse: -29dBu

Power Requirements 48V phantom

Finish Champagne Silver

Connector XLR3M

Dimensions Ø22 × 110mm

(Ø0.89" × 4.35")

Net Weight 120g (4.2 oz.)

PAGE 1
PINK STICK SIGNAL GENERATOR Description The Pink Stick is a random noise generator with builtin XLR-3M connector. It can be directly plugged into to the microphone pre-amplifier which provides phantom power, so no battery is needed. Its rotary switch selects between pink noise, 1 kHz tone, and pulse tone. There is a mute setting between each signal setting to ensure operational safety for the connected equipment. Features Specifications • Built-in pink noise, 1 kHz tone, and pulse tone.
PAGE 2
This information sheet contains important information for the safe use of the product. Read and follow the safety and handling instructions given here. Please keep this information sheet for future reference. If you pass on the product described overleaf, please enclose this information sheet. Safety instructions Disposal Intended use Old devices This device is used to generate a noise signal for test purposes.