User Guide

1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety information
Malfunctions analysis & troubleshooting
Wrong color
1. Wrong connection of R/G/B wires.
1. Reconnect R/G/B wires.
Malfunctions
Causes
Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
No. Name
RG B fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
6
7
8
9
10
LE D power supply voltage and power select:
12V lamp, Input 12V power supply, can load 0~144W,
24V lamp, Input 24V power supply, can load 0~288W,
Power supply power must larger than load power 20%.
RGB L E D strip
Power Supply
12-24VDC
Constant Voltage
AC110-230V
Dynamic mode list
No. Name
RG B jump
RG B smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
1
2
3
4
5
Wiring diagram