Installation Manual
14 
1: Remove the 2 covers on the back of the 
range  unscrewing  the  3  screws indicated 
on below pictures. 
2 - Take from the top of packaging the 
parts shown in the picture below to 
assemble the pressure regulator.
3 - Screw the assembled pressure regu-
lator on the range like shown on picture 
below. Pay attention to the vertical aligne-
ment of the same pressure regulator.
Gas Requirements 
4 - Re-install the covers previously 
removed. On the cover on the pressure 
regulator add the provided screw on the 
left side like shown in the picture below.
COVERS
SCREWS
TO INSTALL PRESSURE REGULATOR










