Manualshelf

Installation Manual

ManualsBrandsSuperiore ManualsCooking Appliances48 Inch Deco Series Range with 6 Sealed Burners, Griddle, 2 Electric Ovens, Cast Iron Grates, Analog Controls and Removable Drip Tray.: Cream Matte, Bronze Accents
21222324252627282930
22
|
Gas Requirements
STEP 2: SURFACE BURNERS
To replace the nozzles of the surface burners, lift up the burners
and unscrew the nozzles shipped with the range using a 7 mm
(sochet wrench). Replace nozzles using the conversion set
supplied with the range or by a Tecno authorized parts warehouse.
Each nozzle has a number indicating its ow diameter printed
on the body. Consult the table on “Specications Technical data”
paragraph for matching nozzles to burners.
STEP 3 (FOR ALL-GAS RANGES ONLY): MAIN OVEN BURNER
To replace the nozzles of the main oven burner, start by removing
the bottom panel of the oven.
Loose the 2 screw located on the left and right sides of the burner
and the burner from its support.
ATTENTION: pay extra attention to avoid damage to the igniter
and thermocouple.
Unscrew the nozzle located inside the gas tting using a 10 mm or 7
mm socket wrench. (It depends on type of injector).