Use and Care Manual

34
PowerBoost feature
This feature is available on the front left/rear right zones only.
Using induction worktop special features
To activate the boost function turn the knob in the right overwind position “POW”.
The symbol P will be displayed on the according 7 segment display. After 10 minutes
the boost function will be automatically switched off and the “P” is not shown on the
display anymore.
Important!
The PowerBoost feature is not suitable for use with non water based cooking.Do not
use this function for heating oil (e.g. deep fat frying). The power density may be too
high and it could damage the cookware.