Use and Care Manual

33
Accelerated Heat-up feature
This feature is available on all the cooking zones.
Turn the control dial anti-clockwise to the ‘A’ setting and then release the dial (after
the ‘beep’); the symbol lights up on the corresponding cooking zone display. Within
5 seconds turn the dial to the desired power level (between 1 and 9); once a setting
has been selected, and the chosen power level will ash in alternation on the control
panel display.
This feature allows the cooking zone to operate at the maximum power (100%) for
a time proportional to the selected power level; after this time the cooking zone will
operate at the selected level.While this feature is operating it is possible, at any time,
to increase the selected power level but it is not possible to decrease the power.
Note: If removing the pan from the cooking zone before the programme has been
completed, the Auto Heat-reduce feature will be completed with the remaining time
if the pan is put back on the cooking zone within 10 minutes.
Using induction worktop special features
To activate accelerated heat-up turn the knob anticlockwise in the left overwind posi-
tion “ACC” and hold the knob in that position for 2 seconds. Then, within the next 10
sec, select a cooking level.
The 7 segment display alternates between “A” and the selected cooking level until it
will be reached.
The Auto Heat-reduce feature can be disabled by turning the dial anti-clockwise to a
lower power level, turning the dial to the ‘0’ (Off) position or by selecting the Power-
Boost feature.