Installation Guide

12
Clearance Dimensions (Wood/Composite Overlay)
The bottom of a standard hood should be 30” (76.2 cm) min. to 36” (91.4 cm) max.
above the countertop. This would typically result in the bottom of the hood being 66”
(167.6 cm) to 72” (182.9 cm) above the oor. Refer to the range hood installation
instructions for additional information.
These dimensions provide for safe and efcient operation of the hood.
Important: There must be a minimum of 6” (15.2 cm) clearance from rear of range
to a combustible wall. Clearances from non-combustible materials are not part of
the ANSI Z21. 1 scope and are not certied by CSA. Clearances to non-combustible
materials must be approved by the authority having jurisdiction.












