Operation Manual

42
TELETEXT / TIPS
• Teletext page number will be displayed on the
upper left corner of the screen when the selected
page is found.
• Press “ “ button to display the selected Teletext
page.
To exit Teletext
• Press “ ” button. The screen will switch to TV
mode.
To Display the Time
• While watching a TV programme with Teletext
transmission press “ ” button. The current time
information, captured from Teletext will be display-
ed at the upper middle of the screen for 5 seconds.
• If the programme being watched does not have Te-
letext transmission, no information will be displayed.
TIPS
Care of the Screen
Clean the screen with a slightly damp, soft cloth.
Do not use abrasive solvents as they may damage the
TV screen coating layer
Poor Picture
Have you selected the correct TV system? Is your TV set
or house aerial located too close to the loudspeakers,
non-earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you
have entered the correct frequency.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving any
transmission. Have you pressed the correct keys on the
remote control? Try once more.
Sound
You can not hear any sound. Did you perhaps interrupt
the sound, pressing “ ” key? Are external speakers
connected to the TV?
Sound is coming from only one of the speakers. Is the
balance set to one direction extreme? See SOUND
menu.
Remote Control
Your TV no longer responds to the remote control.
Press the “ ” button on the remote control once
more. Perhaps the batteries are exhausted. If so you
can still use the local keys at the front of your TV.
Have you selected the wrong menu? Press “ ” key
to return to TV mode or press “ ” to return to the
previous menu.
No solution:
Switch your TV set off and on. If this does not work,
call the service personnel; never attempt to repair it
yourself.