Operation Manual

34
MENU SYSTEM
Setting AVL
Automatic Volume Limiting (AVL) function normalises
sound to obtain fixed output level between programs,
having different sound levels. Pressing “F” or “E”
button will turn on and off this feature.
Setting Effect
You can use this feature to switch the sound effect on
and off. Pressing “F” or “E” button will turn on and
off this feature. If the current sound system is MONO
and th e sound effect is set ON, then the sound will be
heard as if it is STEREO. If the current sound system is
STEREO, switching this effect on will make the sound
deeper. Switching it off will make no change in MONO
and STEREO.
Equalizer
To enter Equalizer sub-menu, select Equalizer using “
“ or “ “ button, then enter Equalizer menu pressing
“F” or “E” button.
In MODE item there are five predefined and one user
defined options. These are USER, CLASSIC, JAZZ,
ROCK, POP and FLAT. The predefined options can
not be changed by the user. If you change one of the
frequency values of the predefined options, the MODE
is switched automatically to USER option. The USER
option may be adjusted by the user.
The 5 items below the MODE are available to adjust the
sound settings in 5 frequency values: 120 Hz, 500 Hz,
1.5 kHz, 5 kHz and 10 kHz. To change the values of
5 frequency options, select one of the options by “
“ or “ “ button, and then press “E” to increase the
value, or “F” to decrease the value. In mid position,
cursor is displayed with the two reciprocal arrows.
To store the Equalizer settings, press “F” or “E” button
on “STORE” option.
During the store process all the items are stored, mo-
reover, the USER mode information would not be lost.
In other words, when the user mode is selected again,
after storing the MODE with one of the predefined
options, the user definde frequency values would be set.
To Change Headphone Sound Settings
Pressing “F” or “E” button on HEADPHONE, enter the
Headphone menu. This is a sub-menu of Sound menu,
and all options in this menu are working as the same in
the Sound menu.
Setting Headphone Volume
• As you enter the Headphone sound menu, Volume
will be the first selected option.
• Press “E” button to increase volume.