Operation Manual

32
SWITCHING THE TV ON/OFF /
OPERATING THE TV / MENU SYSTEM
To switch the TV off
• Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LED will become RED,
or,
Press the power button located on the front of the TV,
so the TV will switch off and the GREEN LED will turn
off.
OPERATING THE TV
You can operate your TV both using the remote
control handset and onset buttons.
Operating with the buttons on the TV set
Volume setting and programme selection can be made
using the buttons on the front panel.
Volume Setting
• Press “Vol-” button to decrease volume or “Vol+”
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
• By pressing both the “Vol+” and “Vol-” buttons at
the same time you can enter Main menu.
Programme Selecting
• Press “Prog+” button to select the next programme
or “Prog-” button to select the previous programme.
Entering Main Menu
• Press „MENU“ button to enter Main menu. In
the Main menu select sub-menu using “Prog-” or
“Prog+” button and enter the sub-menu using “Vol-”
or “Vol+” button. To learn the usage of the menus,
refer to the Menu System section.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press “VOL+” button to increase volume. Press “VOL-”
button to decrease volume. A volume level scale (slider)
will be displayed at the middle of the bottom on the
screen.
Programme Selecting (Previous or next programme)
• Press “ “ button to select the previous programme.
• Press “ “ button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to se-
lect programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10 - 99, you must use the double digit button “- -“.
this OSD is displayed at the left hand upper on the
screen.
After then, press the digit buttons consecutively which
programme you want to select (eg. for programme 27,
first press 2 and then 7). When it is late to press any
digit button this function will be ignored and the display
will be erased. In the same way it must not be late to
press any digit button after entering the first digit. The
limit of the delay time is 3 seconds.
Press directly the programme number to reselect single
digit programmes.
Programme Swapping
• Press “P<P“ (programme swap) button to select
the last selected programme.
This button provides swapping
between last two selected
programmes. For example,
select programme 8, then
select programme 2. Now,
if you press “P<P“ button,
programme 8 will be selected.
If you press the same button
again, programme 2 will be
selected and so on.
MENU SYSTEM
Your TV has been designed with a menu system, to
provide an easy manipulation of a multi-function system.
The TV is controlled by choosing the commands, which
are displayed on the screen.
Press the “ ” button. The Main menu will be display-
ed at the middle on the screen.
All the selected items in this menu system is indicated
with CYAN characters and with an arrow on the leftside
of items.