User's Manual

ENFORCER Split Series Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc. 5
Features:
Specifications:
• Split series installation for added security
•
12~24 VDC Auto-adjusting operation
•
Up to 1,000 possible user codes (000~999) and/or
proximity cards for output #1, 100 (001~100) for
output #2, 100 (001~100) for output #3
•
Up to 50 (01~50) possible temporary visitor
codes, which can be programmed for
one-time or limited-time use (1~99 hours)
•
Output #1: Form C relay, 5A@24VDC max.
•
Output #2: Form C relay, 1A@24VDC max.
•
Output #3: Form C relay, 1A@24VDC max.
•
Outputs #1, #2, and #3 can be programmed to
activate for up to 99,999 seconds
(nearly 28 hours)
•
Tamper output: N.C. Dry contact,
50mA@24VDC max.
•
Keypad illuminates when a button is pressed;
backlight can be programmable for FULL or
AUTO in standby mode
•
Built-in door chime
• Built in current limited (750mA) power source for
keypad for added security
• Keypad active, alarm, duress, and interlock
output: Transistor ground, 100mA@24VDC max.
• Keypad mounts to a standard single-gang back
box (surface-mount back box included)
• All features are programmed directly from the
keypad: No need for an external programmer
• EEPROM Memory protects programmed
information in case of power loss
• Up to 50 (01~50) duress codes for output #1, 10
(01~09) for output #2, 10 (01~09) for output #3
• Programmable egress input with optional warning
alarm and delayed egress
• Door sensor input for anti-tailgating operation
• Interlocking input for connecting to a second
keypad for mantrap applications
• Simple three wire connection between keypad
and controller
Operating voltage
12~24 VDC
Current draw
(at 12VDC)
Standby
88mA
Keypress
115mA
Output 1 active
115mA
Output 1 & 2 active
128mA
Output 1, 2, & 3 active
138mA
Total max current draw
220mA
Outputs
#1—Form C
5A@24VDC
#2—Form C
1A@24VDC
#3—Form C
1A@24VDC
Alarm
100mA@24VDC
Key active
100mA@24VDC
Duress
100mA@24VDC
Interlock
100mA@24VDC
Tamper
50mA@24VDC
Inputs
Egress
N.O. Ground
Door sensor
N.C. Ground
Door inhibit
N.O. Ground
Doorbell
N.O. Ground
Tamper
N.C. Ground
Proximity reader frequency
125kHz (EM125)
Proximity reader sensing distance
1
1
/
2
" (38mm)
Operating temperature
-4°~158°F (-20°~70°C)
Operating humidity
5~95% (non-condensing)
Dimensions
Keypad
4
5
/
8
"x2
7
/
8
"x1
1
/
2
" (117x73x38 mm)
Controller
3
7
/
16
"x4
3
/
4
"x1
1
/
4
" (87x120x32 mm)
Weight
Keypad
6.3-oz (180g)
Controller
8.8-oz (250g)