User's Manual

ENFORCER Split Series Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc. 35
See "Programming the Master Code" and "Programming the Super User Code" on pages 17~19 for
fun
ctions specific to those authorized to use those codes.
Opening the Door:
In these examples, assume that the
user code is , the common user code is

, and a unique user code is .
•
Security Level 1 – Card only
READ CARD
1 Long beep indicates that the door can be opened.
•
Security Level 2 – Code only
 *
1 Long beep indicates that the door can be opened.
•
Security Level 3 – Card + Common user code
READ CARD
2 Short beeps and a rapidly flashing amber LED indicates the card is accepted and the keypad
is waiting for the Common user code.
 *
1 Long beep indicates that the door can be opened.
•
Security Level 4 – Card + Unique user code
READ CARD
2 Short beeps and a rapidly flashing amber LED indicates the card is accepted and the keypad
is waiting for the Unique user code.
 *
1 Long beep indicates that the door can be opened.
NOTE:
For more information on security levels, please see "Getting Ready to Program" on
page 14.
* The  key is not needed if the keypad is programmed for auto entry mode. See page 28.
User’s Guide to Operating the SK-4131-SPSQ:
Operating the Egress Button:
Press the egress button from inside the protected premises to unlock the door and exit w
ithout
using the keypad.
NOTE:
For more information or programming the Egress button, please see "Programming the
Egress Delay/Warning/Alarm" on pages 32~33).