User's Manual

ENFORCER Split Series Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc. 21
Programming User Codes and Proximity Cards (continued):
User IDs:
•
 to  – 1,000 unique user IDs for user codes and prox cards for output #1.
•
 to  – 100 unique user IDs for user codes and prox cards for output #2
or output #3.
User Codes:
•
A user code can be 4 to 8 digits long, and must have the same length as all other codes if
the keypad is used in auto code entry mode (see page 28).
•
The master, super user, common user, visitor, duress, and user codes cannot be
the same.
Examples:
1.
Program only a proximity card for user ID #017 for output #1:
 READ CARD 
2.
Program a user code for user ID #010 for output #1:

3.
Delete a proximity card for output #1:
 READ CARD 
4.
Delete code or proximity card for user ID #002 for output #1:

5.
Delete all users for output #1:

6.
Program a proximity card for user ID #001 for output #1 for use with a common user code:
 READ CARD 
NOTE: A common user code must already be programmed to the output
(see pages 19~20).
7.
Program a proximity card for user ID #023 for output #2 for use with unique user code:
 READ CARD 