User's Manual

ENFORCER Split Series Keypad with Proximity Card Reader

12 SECO-LARM U.S.A., Inc.

• Door Auto Relock – The system will immediately

relock the door after the door is closed. This

prevents unwanted "tailgate" entries, which can

happen if an unauthorized person tries to follow an

authorized person through the door.

• Interlock Control – When the door is open, the

Interlock Output will give a (-) ground command to

disable the other keypad in an interlock system

• Door Forced-Open Warning – The keypad will

beep and the controller will beep, activate the

alarm output, and activate the siren whenever the

door is forced open without using a valid user

code. See "programming the Door-Forced Open

Warning and Timing" on page 30.

• Door Propped-Open Warning – The keypad will

beep whenever the door is open longer than the

programmed time. See "Programming the Door-

Propped-Open Warning and Timing" on page 31.

• Door Open Alarm – The controller will activate the

alarm output and siren whenever the door is

opened. See "Programming the Door Open Alarm

and Timing" on page 31.

The Alarm Output switches to (–) ground in door forced to open or the door open after Egress

Delay. You may use it to turn ON an LED lamp and/ or a small buzzer to notify a guard; or

connect it to a 24 hour Normally Open protection zone of an alarm system. See "Programming

the Door-Forced-Open Warming and Timing" and "Programming the Door Open Alarm and

Timing" on pages 30~31.

NOTE: Only one connection option is recommended. Make sure that the sink current does not

exceed the maximum rating of 100mA.

2211 23

Sample Applications for Auxiliary Terminals:

With the help of a Normally Closed

door position sensor (usually a

magnetic door switch) on the door

to set up the following functions:

Door Sensor:

Alarm Output: