User Manual
6
Programming
Press SET briey and set the current time rst:
On the display, the hours ash under CURRENT TIME 00:
00
Press or to set the hours 12:00
Briey press SET and the minutes will ash 12:00
Press or to set the minutes 12:25
Press SET briey to set the spread distance:
Under DISTANCE the L will ash (longest spreading distance: about 3 metres)
Press or to select M (middle: approx. 2 metres) or S (shortest: approx. 1 metre)
Press SET briey to set the starting time for the rst feeding:
SET TIMER and 1 will appear on the display and the hours will ash 0 0:
00
Press or to set the hours 06:00
Briey press SET and the minutes ash 06:00
Press or to set the minutes 06:30
Press SET briey to set the dosing time for the rst feeding:
RUN TIME will appear on the display and the seconds will ash 00
Press or to set the seconds (between 0 and 20) 20
Press SET briey to set the next feeding:
The 1 changes into a 2 and the hours will ash 00:
00
Then set the starting time and dosing time for the second feeding.
Repeat the steps above to set the six feeding options.
If you want to give less feeds per day, leave the starting time on 00:00 and the dosing time on 00, the feeding
will then not take place.
Once all feeds have been programmed the Fish Feeder is ready for use.
NOTICE! Check regularly whether there is sucient food in the container.
Quantity of food
The dosing time (RUN TIME) allows you to set how much feed is dispensed per feeding session. You can set the dosing
time between 0 and 20 seconds, with a longer dosing time more feed is dispensed. The set spread distance of 1 metre
(S), 2 metres (M) or 3 metres (L) also aects the feed quantity. When feeding small pellets (2-4 mm), the insert ring
should be placed. The mentioned values in the table are based on Hikari Staple and give an indication, test the set
amount yourself when using. The number of grams of feed per dosing time/spread distance also depends on the
specic weight of the feed used.