Technical Specifications

Version:
US
Last update:
6/21/2019
TECHNICAL SPECIFICATIONS
Bevel
Micro bevel UFH
See IM
Lock
Tight
Installation
Floating
Layer
Thickness (mm)
Top Layer
0.3
Quartz enhanced UV cured coating + Real wood veneer: Oak or
Walnut
Core
3.7
Backing Layer
1.0 EVA-C
Total
5.0
CERTIFICATIONS & CHEMICAL PROPERTIES
Norm
Item Test method Requirement
Result
GreenGuard Gold
Emissions based on ASTM D5116
≤0.0073ppm Compliant
Carb
Emissions ASTM D6007
≤0.13ppm Compliant
GreenGuard Gold
Emissions Spectrometry, chromatography
TVOC≤220µg
GreenGuard Gold Certified
Prop 65
Orthophthalates Spectrometry
ND Compliant
CPSIA
Lead CPSC-CH-E-1002-08
≤ 90ppm
Compliant
EU REACH Regulation
PAHs Spectrometry, chromatography
<1mg/kg Compliant
SVHC
Spectrometry, chromatography
≤ 0.1% (w/w) Compliant
PHYSICAL PROPERTIES
Norm
Item Test Method
Requirement Result
ASTM F3261
Surface Integrity ASTM F1914
No puncture Pass
Dimensional Stability at 45℃
ASTM F2199/ISO 23999
∆W/∆L ≤ 0.2% (commercial)
Pass
Curling 45℃
ASTM F2199/ISO 23999 ≤2mm Pass
Length tolerance ISO 24337 +/- 2 mm Pass
Width tolerance ISO 24337 +/- 0.4mm Pass
Thickness tolerance ASTM F387 +/- 0.20mm (with backing) Pass
Squareness ISO 24337 0.25mm Pass
Residual Indentation ASTM F1914 ≤0.18mm (70lbs/34kg) Pass
EN 14354
Thickness Swelling EN 13329:2016 Annex G
≤10% Compliant
Wear restance (top layer ≤1mm) EN 14354 Annex D 1000R
Compliant
Locking strength ISO 24334
Long side ≥1KN/m, short side ≥2KN/m
Compliant
EN 13329
Impact resistance-big ball EN 13329 1000mm Compliant
Impact resistance-Small ball EN 13329 10N Compliant
Stain resistance EN 438 Slight change only Compliant
Others
Density
ISO 23996 NA Around 1550kg/m3
Thermal Resistance ASTM C518
NA Suitble for underflooring heating
Glue bonding ASTM D2371
The Glue line of each side: not allowed tackless phenomenon Compliant
Fire Resistance (CHF) ASTM E648/NFPA 253 ≥0.45 Class 1
Specification Sheet SuperFast Hurricane Naturals
Type
Waterproof thermoplastic composite
Page 1 of 3